倍衡(BEC) 為大林電廠煙囪工程承建商 – 壹座採用滑模工程建造方案之工業煙囪,高度約80公尺,位於台灣電力公司(台電)高雄大林發電廠內。本專案負責新建煙囪以配合兩座興建中之2 x 550百萬瓦特燃氣循環(LNG)發電機組, 預計稍後於2029年啟用營運。本工程為倍衡(BEC) 於區域內持續推動之煙囪及高塔結構工程業務之一,延續統包商工程(EPC)與總承建商中鼎工程(CTCI)長期以來之合作關係,並提供現場人員參與高技術、高標準、具指標性之工業煙囪建設專案,由中鼎工程(CTCI)與倍衡(BEC) 國際工程團隊共同合作興建。
About the Project
BEC is delivering the new Talin Power Plant Chimney, a slipform-constructed industrial chimney standing approximately 80 metres, located at Taipower’s (Taiwan Power Company) Talin Power Plant in Kaohsiung, Taiwan. The chimney serves new 2 x 550 MW LNG-fired combined cycle generating units currently under construction at the site, targeted for commercial operation in 2029. The project forms part of BEC’s ongoing portfolio of chimney and tall-structure construction across the region, and continues our long-standing collaboration with CTCI, the EPC contractor. This project offers site personnel the opportunity to work on a technically demanding, high-profile industrial build alongside BEC’s international engineering team.
職務摘要
品管人員負責執行並監督現場品質保證與品質管制程序,範圍涵蓋滑模混凝土工程及內部鋼製煙道兩部分,確保各項工程符合專案規範、台灣公共工程標準及業主要求
The QA/QC Officer will implement and monitor quality assurance and quality control procedures on site, ensuring all works meet project specifications, Taiwanese public works standards, and client requirements.
主要職責
- 對滑模混凝土工程進行品質查驗,包括模板架設、鋼筋配置、混凝土澆置及滑模上升速率控制
- 對雙內部鋼製煙道進行品質查驗,包括製造、銲接、組裝及安裝
- 依核准圖說、混凝土配比設計、銲接程序及檢驗與測試計畫(ITP),查核材料、尺寸及施工品質
- 監測並記錄混凝土測試(坍度、抗壓試體、保養)及鋼製煙道之銲接/塗裝作業,確保符合規範及相關標準
- 建立並維護查驗紀錄、材料追溯紀錄、測試報告及不合格報告(NCR)
- 與工地工程師、滑模施工團隊、製造商及分包商協調,即時解決品質相關問題
- 配合內部及客戶稽核,並持續推動品質績效改善
- Conduct quality inspections on slipform concrete works, including formwork setup, rebar placement, concrete pours, and rate-of-rise/slipform control
- Conduct quality inspections on the twin internal steel flues, including fabrication, welding, assembly, and installation
- Verify materials, dimensions, and workmanship against approved drawings, concrete mix designs, welding procedures, and inspection test plans (ITPs)
- Monitor and record concrete testing (slump, cube/cylinder tests, curing) and welding/coating activities on the steel flues, ensuring compliance with specifications and relevant standards
- Prepare and maintain inspection records, material traceability logs, test reports, and Non-Conformance Reports (NCRs)
- Coordinate with site engineers, the slipform crew, fabricators, and subcontractors to resolve quality issues promptly
- Support internal and client audits, and promote continuous improvement in quality performance
基本資歷
- 須持有現行有效之台灣工程會公共工程品質管理證書(公共工程品質管理證書);若原證書核發已逾4年,須完成規定之36小時回訓課程,以符合當地法規對工地人員之要求
- 具土木、結構或機械工程相關學士學歷,或相關科系
- 具備3至5年以上混凝土結構及/或鋼構製造與組裝之品管實務經驗(大型工業或基礎建設專案),具滑模混凝土經驗者尤佳
- 熟悉相關混凝土測試標準及銲接檢驗程序(如 AWS、BS EN 或 SS 標準)
- 具備非破壞檢測(NDT)、模板/鋼筋查驗及尺寸管制經驗者尤佳
- 須具中文(以利工程文件及地方主管機關聯繫使用)流利聽說讀寫能力,並具英文溝通能力(以利匯報倍衡(BEC) 國際團隊)
- Must hold a valid Taiwan PCC Public Works Quality Management Certificate (公共工程品質管理證書), or complete the required 36-hour refresher course if the original certificate is older than 4 years, to fulfil local statutory site requirements
- Bachelor’s degree in Civil, Structural, or Mechanical Engineering, or a related discipline
- Minimum 3–5 years of QA/QC experience on concrete structures and/or steel fabrication and erection for large industrial or infrastructure projects; slipform concrete experience strongly preferred
- Familiar with relevant concrete testing standards, welding inspection procedures (e.g. AWS, BS EN, or SS), and Taiwanese construction quality standards (CNS)
- Experience with NDT, formwork/rebar inspection, and dimensional control is an advantage
- Fluent in spoken and written Mandarin (for PCC documentation and local authority liaison), with working English for international stakeholder reporting
25年來,Balanced Engineering & Construction(BEC)持續在亞洲各地執行複雜之能源與工業工程專案。我們的團隊以技術卓越、誠信及可靠著稱。
在台灣,BEC 已與中鼎工程(CTCI)及台灣電力公司(台電)合作,成功完成多項大型基礎建設工程,展現我們對區域發展及能源轉型之長期承諾。
BEC 與眾不同之處,不只在於我們所做的工作,更在於我們的團隊。許多同仁在 BEC 服務長達10年、15年,甚至20年之久。這並非偶然。加入 BEC 的人會選擇留下,因為這裡的工作真實有意義、專案舉足輕重,團隊更像是一個大家庭。
歡迎加入我們,成為這個以工程專業、團隊合作及創新精神共同形塑永續基礎建設未來之公司的一份子。
應徵方式:
請點此線上應徵,或將您的求職信及履歷寄至 hr@be-con.com,主旨請註明:QA/QC Officer
To apply for this job email your details to hr@be-con.com